• 简体中文
• English

MAX14595：High-Speed, Open-Drain Capable Logic-Level Translator

Dual-Channel, Bidirectional Logic-Level Translator Designed Specifically for Low Power Consumption

The MAX14595 is a dual-channel, bidirectional logic-level translator designed specifically for low power consumption making it suitable for portable and battery-powered equipment. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. A logic signal present on the VL side of the device appears as the same logic signal on the VCC side of the device, and vice-versa. The device is optimized for the I²C bus as well as the management data input/output (MDIO) bus where often high-speed, open-drain operation is required. When TS-bar is high, the device allows the pullup to be connected to the I/O port that has the power. This allows continuous I²C operation on the powered side without any disruption while the level translation function is off. The part is specified over the extended -40°C to +85°C temperature range, and is available in 8-bump WLP and 8-pin TDFN packages.

Key Features Meets Industry Standards I²C Requirements for Standard, Fast, and High* Speeds MDIO Open Drain Above 4MHz* Allows Greater Design Flexibility Down to 0.9V Operation on VL Side Supports Above 8MHz Push-Pull Operation Ultra-Low Power Consumption 7µA (typ) VCC Supply Current 3µA (typ) VL Supply Current Provides High Level of Integration Pullup Resistor Enabled with One Side Power Supply when TS-bar Is High 12kΩ (max) Internal Pullup Low Transmission Gate RON: 17Ω (max) Saves Space 8-Bump, 0.4mm Pitch, 0.8mm x 1.6mm WLP Package 8-Pin, 2mm x 2mm TDFN Package

MAX14595: Typical Operating Circuit Applications/Uses Devices with I²C Communication Devices with MDIO Communication General Logic-Level Translation Portable and Battery-Powered Electronics

DataSheet

Parametrics

Quality and Environmental Data

• MAX14595.pdf

Related Products

• MAX14591：High-Speed, Open-Drain Capable Logic-Level Translator

Ordering Information