MAX4038:Low IBIAS, +1.4V/800nA, Rail-to-Rail Op Amps with +1.2V Buffered Reference

Low IBIAS +1.4V/800nA, Rail-to-Rail Op Amplifiers with +1.2V Buffered Reference

The single MAX4036/MAX4037 and dual MAX4038/MAX4039 operational amplifiers operate from a single +1.4V to +3.6V (without reference) or +1.8V to +3.6V (with reference) supply and consume only 800nA of supply current per amplifier, and 1.1µA for the optional reference. The MAX4036/MAX4038 feature a common-mode input voltage range from 0V to VDD - 0.4V at VDD = 1.4V. The MAX4037/MAX4039 feature a 1.232V voltage reference capable of sourcing 100µA and sinking 20µA. The MAX4036–MAX4039s' rail-to-rail outputs drive 5kΩ loads to within 25mV of the rails. Ultra-low supply current, low operating voltage, and rail-to-rail outputs make the MAX4036–MAX4039 ideal for use in single-cell lithium-ion (Li+), or two-cell NiCd/NiMH/alkaline battery-powered applications. The MAX4036 is available in an SC70 package, the MAX4037 in a SOT23 package, and the MAX4038/MAX4039 in UCSP™, µMAX®, and TDFN packages.

Key Features
  • Ultra-Low 800nA per Amplifier Supply Current
  • Ultra-Low 1.4V Supply Voltage Operation (1.8V for MAX4037/MAX4039)
  • Rail-to-Rail Outputs Drive 5kΩ and 5000pF Load
  • 1.232V ±0.5%, 120ppm/°C (max) Reference (MAX4037/MAX4039)
  • No External Reference Bypass Capacitor Required
  • No Phase Reversal for Overdriven Inputs
  • Low 1.0pA (typ) Input Bias Current
  • Low 200µV Input Offset Voltage
  • Unity-Gain Stable
  • Available in Tiny UCSP, SC70, SOT23, TDFN, and µMAX Packages
  • Available in -40°C to +125°C Temperature Range (MAX4036A/MAX4038A)
MAX4036, MAX4037, MAX4038, MAX4039: Typical Operating Circuit
MAX4036, MAX4037, MAX4038, MAX4039: Typical Operating Circuit
Applications/Uses
  • Active Badges
  • Battery-Powered/Solar-Powered Systems
  • Cellular Handsets
  • Digital Cameras (DIGICAMs)
  • Electrometer Amplifiers
  • Glucose Meters
  • GPS Solutions
  • IP Camera
  • Micropower Thermostats and Potentiostats
  • MP3 and Portable Media Players
  • Pagers and Cell Phones
  • pH Meters
  • Portable Medical Instrumentation
  • Remote Sensor Amplifiers
DataSheet
titleDownload file
MAX4036-MAX4039 Data SheetMAX4036-MAX4039.pdf
Parametrics
Part NumberAmps.Rail to RailVSUPPLY (Total)
(V)
VSUPPLY (Total)
(V)
ICC per Amp.
(µA)
VOS
(µV)
CMRR @DC
(dB)
PSRR @DC
(dB)
Low Input Bias CMOS InputsInput IBIAS
(nA)
Unity Gain BW
(MHz)
Slew Rate
(V/µs)
en
(nV/√Hz)
Package/PinsBudgetary
Price
minmaxtypmaxtyptypmaxtyptyp<See Notes
MAX40361Output Only1.43.60.820007082Yes0.010.0040.0004500SC-70/5$0.69 @1k
MAX403711.984SOT/6$0.93 @1k
MAX403820.882µMAX/8
TDFN-EP/8
UCSP/9
$1.10 @1k
MAX403921.484µMAX/10
TDFN-EP/10
UCSP/9
$1.24 @1k
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4038AAUA+ActiveµMAX,;8 pin;15.6 mm²-40°C to +125°CLead Free
MAX4038AAUA+TActiveuMAX;8 pin-40°C to +125°CSee data sheet
MAX4038EBL+ActiveUCSP,;9 pin;2.5 mm²-40°C to +85°CLead Free
MAX4038EBL+TActiveUCSP,;9 pin;2.5 mm²-40°C to +85°CLead Free
MAX4038EBL-TNo Longer AvailableMAX4038EBL+TUCSP,;9 pin;2.5 mm²-40°C to +85°CNo
MAX4038ETA+ActiveTDFN-EP,;8 pin;9.6 mm²-40°C to +85°CLead Free
MAX4038ETA+TActiveTDFN-EP,;8 pin;9.6 mm²-40°C to +85°CLead Free
MAX4038ETA-TNo Longer AvailableMAX4038ETA+TTDFN-EP,;8 pin;9.6 mm²-40°C to +85°CNo
MAX4038EUANo Longer AvailableMAX4038EUA+µMAX,;8 pin;15.6 mm²-40°C to +85°CNo
MAX4038EUA+ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4038EUA+TActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
MAX4038EUA-TNo Longer AvailableMAX4038EUA+TuMAX;8 pin-40°C to +85°CSee data sheet
MAX4036-MAX4039.pdf MAX4039
MAX4038.pdf MAX4038
MAX4036-MAX4039.pdf MAX4039