• 简体中文
• English

MAX4661：2.5 Ohm Quad, SPST, CMOS Analog Switches

The MAX4661/MAX4662/MAX4663 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle rail-to-rail analog signals. Off-leakage current is only 5nA max at TA = +85°C. These analog switches are ideal in low-distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have lower power requirements, use less board space, and are more reliable than mechanical relays. The MAX4661 has four normally closed (NC) switches, and the MAX4662 has four normally open (NO) switches. The MAX4663 has two NC and two NO switches, and features guaranteed break-before-make switching. These devices operate from a single +4.5V to +36V supply or from dual ±4.5V to ±20V supplies. A separate logic supply pin guarantees TTL/CMOS-logic compatibility when operating across the entire supply voltage range.

Key Features Low On-Resistance (2.5Ω max) Guaranteed RON Match Between Channels (0.5Ω max) Guaranteed RON Flatness over Specified Signal Range (0.5Ω max) Rail-to-Rail Signal Handling Guaranteed Break-Before-Make (MAX4663) > 2kV ESD Protection per Method 3015.7 +4.5V to +36V Single-Supply Operation ±4.5V to ±20V Dual-Supply Operation TTL/CMOS-Compatible Control Inputs

MAX4661, MAX4662, MAX4663: Pin Configuration Applications/Uses ADC Systems Audio-Signal Routing Avionics Communication Systems Data Acquisition PBX/PABX Systems Reed Relay Replacement Sample-and-Hold Circuits Test Equipment

DataSheet

Parametrics

Quality and Environmental Data

• MAX4661.pdf

Ordering Information