MAX5534:Dual, Ultra-Low-Power, 12-Bit, Voltage-Output DACs

The MAX5532–MAX5535 are dual, 12-bit, ultra-low-power, voltage-output, digital-to-analog converters (DACs) offering rail-to-rail buffered voltage outputs. The DACs operate from a 1.8V to 5.5V supply and consume less than 5µA, making the devices suitable for low-power and low-voltage applications. A shutdown mode reduces overall current, including the reference input current, to just 0.18µA. The MAX5532–MAX5535 use a 3-wire serial interface that is compatible with SPI™, QSPI™, and MICROWIRE™. Upon power-up, the MAX5532–MAX5535 outputs are driven to zero scale, providing additional safety for applications that drive valves or for other transducers that need to be off during power-up. The zero-scale outputs enable glitch-free power-up. The MAX5532 accepts an external reference input and provides unity-gain outputs. The MAX5533 contains a precision internal reference and provides a buffered external reference output with unity-gain DAC outputs. The MAX5534 accepts an external reference input and provides force-sense outputs. The MAX5535 contains a precision internal reference and provides a buffered external reference output with force-sense DAC outputs. The MAX5534/MAX5535 are available in a 4mm x 4mm x 0.8mm, 12-pin, thin QFN package. The MAX5532/MAX5533 are available in an 8-pin µMAX® package. All devices are guaranteed over the extended -40°C to +85°C temperature range. For 10-bit compatible devices, refer to the MAX5522–MAX5525 data sheet. For 8-bit compatible devices, refer to the MAX5512–MAX5515 data sheet.

Key Features
  • Ultra-Low 5µA Supply Current
  • Shutdown Mode Reduces Supply Current to 0.18µA (max)
  • Single +1.8V to +5.5V Supply
  • Small 4mm x 4mm x 0.8mm Thin QFN Package
  • Internal Reference Sources 8mA of Current (MAX5533/MAX5535)
  • Flexible Force-Sense-Configured Rail-to-Rail Output Buffers
  • Fast 16MHz, 3-Wire, SPI-/QSPI-/MICROWIRE-Compatible Serial Interface
  • TTL- and CMOS-Compatible Digital Inputs with Hysteresis
  • Glitch-Free Outputs During Power-Up
  • EV Kit Available
MAX5532, MAX5533, MAX5534, MAX5535: Functional Block Diagram
MAX5532, MAX5533, MAX5534, MAX5535: Functional Block Diagram
Applications/Uses
  • Automatic Trimming and Calibration in Factory or Field
  • Chemical Sensor Cell Bias for Gas Monitors
  • Industrial Process Control and Remote Industrial Devices
  • Instrumentation
  • Portable Battery-Powered Devices
  • Programmable LCD Bias
  • Programmable Voltage and Current Sources
  • Remote Data Conversion and Monitoring
DataSheet
titleDownload file
MAX5532-MAX5535 Data SheetMAX5532-MAX5535.pdf
Parametrics
Part NumberResolution
(bits)
ChannelsOutput TypeReferenceINL
(±LSB)
InterfaceSupply Range
(V)
Supply Range
(V)
ICC
(mA)
Settling Time
(µs)
Package/PinsOper. Temp.
(°C)
Budgetary
Price
maxminmaxmaxtypSee Notes
MAX5532122Voltage- BufferedExt.8Serial - SPI1.85.50.006660µMAX/8-40 to +85$2.90 @1k
MAX5533Int.0.008µMAX/8$3.98 @1k
MAX5534Ext.0.006TQFN/12$3.72 @500
MAX5535Int.0.008TQFN/12$3.17 @1k
Design kits & evaluation modules
Related Products
  • MAX5522:Dual, Ultra-Low-Power, 10-Bit, Voltage-Output DACs
  • MAX5512:Dual, Ultra-Low-Power, 8-Bit, Voltage-Output DACs
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5534ETCNo Longer AvailableMAX5534ETC+TQFN,;12 pin;16.8 mm²-40°C to +85°CNo
MAX5534ETC+ActiveTQFN,;12 pin;16.8 mm²-40°C to +85°CLead Free
MAX5534ETC+TActiveQFN;12 pin-40°C to +85°CSee data sheet
MAX5534ETC-TNo Longer AvailableMAX5534ETC+TQFN;12 pin-40°C to +85°CSee data sheet
MAX5532-MAX5535.pdf MAX5535
Reduce the Chances of Human Error: Part 1, Power and Ground MAX5481
Damage from a Lightning Bolt or a Spark—It Depends on How Tall You Are! MAX5484
How Signal Chains and PLCs Impact Our Lives MAX5421
Typically Testing “Typical” in a Typical Manner MX7847
Well Grounded, Digital Is Analog MAX5401
MAX5532-MAX5535.pdf MAX5535