MAX619:Regulated 5V Charge Pump DC-DC Converter

Compact, Inductorless, Low-Profile 5V Backup Supply Fits in 0.1 Sq. Inch

The MAX619 step-up charge-pump DC-DC converter delivers a regulated 5V ±4% output at 50mA over temperature. The input voltage range is 2V to 3.6V (two battery cells). The complete MAX619 circuit fits into less than 0.1in² of board space because it requires only four external capacitors: two 0.22µF flying capacitors, and 10µF capacitors at the input and output. Low operating supply current (150µA max) and low shutdown supply current (1µA max) make this device ideal for small, portable, and battery-powered applications. When shut down, the load is disconnected from the input. The MAX619 is available in 8-pin DIP and SO packages.

Key Features
  • Regulated 5V ±4% Charge Pump
  • Output Current Guaranteed over Temperature
    • 20mA (VIN ≥ 2V)
    • 50mA (VIN, ≥ 3V)
  • 2V to 3.6V Input Range
  • No Inductors; Very Low EMI Noise
  • Ultra-Small Application Circuit (0.1in²)
  • Uses Small, Inexpensive Capacitors
  • 500kHz Internal Oscillator
  • Logic-Controlled 1µA Max Shutdown Supply Current
  • Shutdown Disconnects Load from Input
  • 8-Pin DIP and SO Packages
MAX619: Typical Operating Circuit
MAX619: Typical Operating Circuit
Applications/Uses
  • 5V Flash Memory Programmer
  • Battery-Powered Microprocessor-Based Systems
  • Compact 5V Op-Amp Supply
  • Local 3.3V to 5V Conversion
  • Minimum Component DC-DC Converters
  • Portable Instruments and Handy-Terminals
  • Regulated 5V Supply from Lithium Backup Battery
  • Remote Data-Acquisition Systems
  • Switching Drive Voltage for MOSFETs in Low-Voltage Systems
  • Two Battery Cells to 5V Conversion
DataSheet
titleDownload file
MAX619 Data SheetMAX619.pdf
Parametrics
Part NumberTopologyVIN
(V)
VIN
(V)
ICC
(mA)
Unadj. VOUT
(V)
IOUT
(A)
Oper. Freq.
(kHz)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
minmaxmaxtypSee Notes
MAX619Doubler
Regulated
23.60.1750.05500-40 to +85
0 to +70
CDIP(N)/8
PDIP(N)/8
SOIC(N)/8
$1.60 @1k
Design kits & evaluation modules
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX619CPANo Longer AvailableMAX619CPA+PDIP(N),;8 pin;79.7 mm²0°C to +70°CNo
MAX619CPA+ActivePDIP(N),;8 pin;79.7 mm²0°C to +70°CLead Free
MAX619CSANo Longer AvailableMAX619CSA+SOIC(N),;8 pin;30.9 mm²0°C to +70°CNo
MAX619CSA+ActiveSOIC(N),;8 pin;30.9 mm²0°C to +70°CLead Free
MAX619CSA+TActiveSOIC(N),;8 pin;30.9 mm²0°C to +70°CLead Free
MAX619CSA-TNo Longer AvailableMAX619CSA+TN.SO;8 pin0°C to +70°CSee data sheet
MAX619EPANo Longer AvailableMAX619EPA+PDIP(N),;8 pin;79.7 mm²-40°C to +85°CNo
MAX619EPA+ActivePDIP(N),;8 pin;79.7 mm²-40°C to +85°CLead Free
MAX619ESANo Longer AvailableMAX619ESA+SOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
MAX619ESA+ActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX619ESA+TActiveSOIC(N),;8 pin;30.9 mm²-40°C to +85°CLead Free
MAX619ESA-TNo Longer AvailableMAX619ESA+TSOIC(N),;8 pin;30.9 mm²-40°C to +85°CNo
MAX619MJANo Longer AvailableCDIP(N),;8 pin;82.6 mm²-55°C to +125°CNo
MAX619.pdf MAX619
MAX619.pdf MAX619
MAX619.pdf MAX619
Driving Microelectromechanical Systems (MEMS) with Precision Control DS3231M
DC-DC Conversion Without Inductors MAX871
Choose the Right Ultra-Thin DC-DC Converter for a Compact PCMCIA Card MAX884
MAX619.pdf MAX619
MAX619.pdf MAX619