MAX6411:Voltage Detectors in 4-Bump (2 x 2) Chip-Scale Package

Low-Power Voltage Detectors in 4-Bump Chip Scale Package

The MAX6406–MAX6411 is a family of ultra-low power circuits used for monitoring battery, power-supply, and regulated system voltages. Each detector contains a precision bandgap reference comparator and is trimmed to specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring system voltages from 2.5V to 5.0V. A manual reset input is also included. The MAX6406–MAX6411 assert a signal whenever the VCC supply voltage falls below a preset threshold. These devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6406/MAX6409 (push-pull) and the MAX6408/MAX6411 (open-drain) have an active-low output (active-low OUT is logic low when VCC is below VTH). The MAX6407/MAX6410 have an active-high push-pull output (OUT is logic high when VCC is below VTH). All parts are guaranteed to be in the correct output logic state for VCC down to 1V. The detector is designed to ignore fast transients on VCC. The MAX6406/MAX6407/MAX6408 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6409/MAX6410/MAX6411 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments. Ultra-low supply current of 500nA (MAX6406/MAX6407/MAX6408) makes these parts ideal for use in portable equipment. These devices are available in 4-bump chip-scale packages (UCSP™).

Key Features
  • Tiny 4-Bump (2 x 2) UCSP (See UCSP Reliability Section for More Details).
  • 70% Smaller Than SC70 Packages
  • Ultra-Low 500nA Supply Current (MAX6406/MAX6407/MAX6408)
  • Factory-Trimmed Reset Thresholds from 2.20V to 4.63V in Approximately 100mV Increments
  • ±2.5% Threshold Accuracy (-40°C to +85°C)
  • Manual Reset Input
  • Guaranteed OUT Valid to VCC = 1.0V
  • Three Reset Output Logic Options: Active-Low Push-Pull, Active-High Push-pull, and Active-Low Open-Drain
  • Immune to Short VCC Transients
  • No External Components
MAX6406, MAX6407, MAX6408, MAX6409, MAX6410, MAX6411: Pin Configuration
MAX6406, MAX6407, MAX6408, MAX6409, MAX6410, MAX6411: Pin Configuration
Applications/Uses
  • Cell Phones
  • MP3 Players
  • Pagers
  • PDAs
  • Portable Battery-Powered Equipment
DataSheet
titleDownload file
MAX6406-MAX6411 Data SheetMAX6406-MAX6411.pdf
Parametrics
Part NumberReset Thresh.
(V)
Reset OuttRESETWatchdog FeatureSupervisor FeaturesReset Thresh. Accur.
(%)
ICC
(µA)
Package/PinsBudgetary
Price
min@ +25°CmaxSee Notes
MAX64061.8 to 2.5
2.5 to 3.3
Active Low
Push-Pull
<1msNo WatchdogManual Reset2.50.5UCSP/4$0.76 @10k
MAX64071.8 to 2.5
2.5 to 3.3
Active High
Push-Pull
0.5UCSP/4$0.76 @10k
MAX64081.8 to 2.5
2.5 to 3.3
Active Low
Open Drain
0.5UCSP/4$1.07 @1k
MAX64092.5 to 3.3
3.3 to 5.5
Active Low
Push-Pull
1UCSP/4$0.76 @10k
MAX64102.5 to 3.3
3.3 to 5.5
Active High
Push-Pull
1UCSP/4-
MAX64112.5 to 3.3
3.3 to 5.5
Active Low
Open Drain
1UCSP/4$1.07 @1k
Related Products
  • MAX6378:3-Pin, Ultra-Low-Power SC70/SOT23 Voltage Detectors
  • MAX6379:3-Pin, Ultra-Low-Power SC70/SOT23 Voltage Detectors
  • MAX6376:3-Pin, Ultra-Low-Power SC70/SOT23 Voltage Detectors
  • MAX6380:3-Pin, Ultra-Low-Power SC70/SOT23 Voltage Detectors
  • MAX6377:3-Pin, Ultra-Low-Power SC70/SOT23 Voltage Detectors
  • MAX6375:3-Pin, Ultra-Low-Power SC70/SOT23 Voltage Detectors
  • MAX6808:Voltage Detectors
  • MAX6806:Voltage Detectors
  • MAX6807:Voltage Detectors
  • MAX6346:3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
  • MAX6327:3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
  • MAX6328:3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
  • MAX6326:3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
  • MAX6347:3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
  • MAX6348:3-Pin, Ultra-Low-Power SC70/SOT µP Reset Circuits
  • MAX836:4-Pin Micropower Voltage Monitors
  • MAX837:4-Pin Micropower Voltage Monitors
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX6411BS35+TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS35-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS36+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS36-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS37+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS37-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS38+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS38-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS39+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS39-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX6411BS40+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS40-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS41+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS41-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS42+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS42-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS43+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS43-TNo Longer AvailableUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS44+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS44-TNo Longer AvailableMAX6411BS44+TUCSP,;4 pin;1.3 mm²0°C to +70°CNo
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX6411BS45+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS45-TNo Longer AvailableMAX6411BS45+TUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6411BS46+TActiveUCSP,;4 pin;1.3 mm²0°C to +70°CLead Free
MAX6411BS46-TNo Longer AvailableMAX6411BS46+TUCSP,;4 pin;1.3 mm²0°C to +70°CNo
MAX6406-MAX6411.pdf MAX6411
引脚配置 MAX6411