MAX6615:Dual-Channel Temperature Monitors and Fan-Speed Controllers with Thermistor Inputs

Industry's Only Dual-Channel Temperature Monitor and Fan Controllers with Thermistor Inputs

The MAX6615/MAX6616 monitor two temperature channels, either the internal die temperature and the temperature of an external thermistor, or the temperatures of two external thermistors. The temperature data controls a PWM output signal to adjust the speed of a cooling fan, thereby minimizing noise when the system is running cool, but providing maximum cooling when power dissipation increases. The fans' tachometer output signals are monitored by the MAX6615/MAX6616 to detect fan failure. If a fan failure is detected, the active-low FAN_FAIL output is asserted. The 2-wire serial interface accepts standard system management bus (SMBus™) write byte, read byte, send byte, and receive byte commands to read the temperature data and program the alarm thresholds. The programmable alarm output can be used to generate interrupts, throttle signals, or overtemperature shutdown signals. The MAX6616 features six GPIOs to provide additional flexibility. All of the GPIOs power-up as inputs, with the exception of GPIO0, which powers up as either an input or an output as determined by connecting the PRESET pin to ground or VCC. The MAX6616 is available in a 24-pin QSOP package, while the MAX6615 is available in a 16-pin QSOP package. Both devices operate from a single-supply voltage range of 3.0V to 5.5V, have operating temperature ranges of -40°C to +125°C, and consume just 500µA of supply current.

Key Features
  • Two Thermistor Inputs
  • Two Open-Drain PWM Outputs for Fan-Speed Control
  • Local Temperature Sensor
  • Six GPIOs (MAX6616)
  • Programmable Fan-Control Characteristics
  • Controlled PWM Rate-of-Change Ensures Unobtrusive Fan-Speed Adjustments
  • Fail-Safe System Protection
  • Active-Low OT Output for Throttling or Shutdown
  • Nine Different Pin-Programmable SMBus Addresses
  • 16-Pin and 24-Pin QSOP Packages
MAX6615, MAX6616: Typical Application Circuit
MAX6615, MAX6616: Typical Application Circuit
Applications/Uses
  • Desktop Computers
  • Networking Equipment
  • Power Supplies
  • Servers
  • Workstations
DataSheet
titleDownload file
MAX6615-MAX6616 Data SheetMAX6615-MAX6616.pdf
Parametrics
Part NumberSensor TypeFan Controller FunctionsFan Cntrl.InterfaceAccuracy
(±°C)
Temp. Thresh.
(°C)
Temp. Resolution
(bits)
Package/PinsBudgetary
Price
See Notes
MAX6615RemoteFan Failure DetectorPWM2-Wire/I2C/SMBus1Programmable11QSOP/16$2.20 @1k
Design kits & evaluation modules
Quality and Environmental Data
Related Products
  • MAX6639:2-Channel Temperature Monitor with Dual, Automatic, PWM Fan-Speed Controller
  • MAX6678:2-Channel Temperature Monitor with Dual Automatic PWM Fan-Speed Controller and Five GPIOs
  • MAX6643:Automatic PWM Fan-Speed Controllers with Overtemperature Output
  • MAX6641:SMBus-Compatible Temperature Monitor with Automatic PWM Fan-Speed Controller
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX6615AEENo Longer AvailableMAX6615AEE+QSOP,;16 pin;30.9 mm²-40°C to +125°CNo
MAX6615AEE+ActiveQSOP,;16 pin;30.9 mm²-40°C to +125°CLead Free
MAX6615AEE+TActiveQSOP,;16 pin;30.9 mm²-40°C to +125°CLead Free
MAX6615AEE-TNo Longer AvailableMAX6615AEE+TQSOP;16 pin-40°C to +125°CSee data sheet
MAX6615-MAX6616.pdf MAX6616
MAX6615-MAX6616.pdf MAX6616
MAX6615-MAX6616.pdf MAX6616
Calculating the Tachometer Register Value of the MAX6615/MAX6616 MAX6616
Circuit Converts PWM Fan Drive to Linear and Reduces Acoustic Noise MAX6653
MAX6615.pdf MAX6615