MCP2003

For product comparison, please consider:

Stand-alone LIN Transceiver -- MCP200x family members; 8-pin PDIP, DFN and SOIC packages - MCP2003-LIN-compatible driver with WAKE pin -- MCP2004-LIN-compatible driver with FAULT/TXE pin. -- This device provides a bidirectional, half-duplex communication physical interface to automotive, and industrial LIN systems to meet the LIN bus specification Revision 2.1 and SAE J2602. The device is short circuit and overtemp protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of the stringent quiescent current requirements.

Features
  • The MCP2003 and MCP2004 are compliant with LIN Bus Specifications 1.3, 2.0, and 2.1 and are compliant to SAE J2602
  • Support Baud Rates up to 20 Kbaud with LIN-compatible output driver
  • 43V load dump protected
  • Very low EMI meets stringent OEM requirements
  • Very high ESD immunity >20kV on VBB (IEC 61000-4-2) >14kV on LBUS (IEC 61000-4-2)
  • >20kV on VBB (IEC 61000-4-2)
  • >14kV on LBUS (IEC 61000-4-2)
  • Very high immunity to RF disturbances meets stringent OEM requirements
  • Wide supply voltage, 6.0V - 18.0V continuous
  • Extended Temperature Range: -40 to +125°C
  • Interface to PIC® EUSART and standard USARTs
  • Local Interconnect Network (LIN) bus pin: Internal pull-up resistor and diode Protected against battery shorts Protected against loss of ground High current drive
  • Internal pull-up resistor and diode
  • Protected against battery shorts
  • Protected against loss of ground
  • High current drive
  • Automatic thermal shutdown
  • Low-power mode: Receiver monitoring bus and Transmitter off, (~ 5 µA)
  • Receiver monitoring bus and Transmitter off, (~ 5 µA)
Parameter
Parameter Name Value Value
Description LIN Transceiver LIN Transceiver
Max. Baud Rate (kBaud) 20 20
Vcc Range (V) 6 to 27 6 to 27
Documents
MCP2003/MCP2004/MCP2003A/MCP2004A Data SheetData Sheets11/12/2014618KB
AN1009 - LIN 2.0 Compliant Driver Using the PIC18XXXX Family MicrocontrollersAppNote04/26/2011298KB
AN1099 - LIN 2.0 Compliant Driver Using the PIC16FXXX Family MicrocontrollersAppNote04/06/2011404KB
MCP2003 Power-Down and Wake-up HandlingTech Briefs02/09/2011127KB
Analog Solutions for Automotive Applications Design GuideBrochures12/08/2009284KB
LIN Serial Analyzer Update v2.03Software01/15/2009457KB
Analog & Interface Product Selector GuideProduct Line Card03/21/20164116KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP2003-E/MD8DFN-40C to +125CTUBE0.930.770.700.680.67
MCP2003-E/P8PDIP-40C to +125CTUBE0.880.730.670.640.64
MCP2003-E/SN8SOIC-40C to +125CTUBE0.880.730.670.640.64
MCP2003T-E/MD8DFN-40C to +125CT/R0.930.770.700.680.67
MCP2003T-E/SN8SOIC-40C to +125CT/R0.880.730.670.640.64
相关开发工具
Similar Devices
ProductVcc RangeVreg Output Voltage VLIN Spec SupportedPrice5K
MCP20036 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2003A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP2003B6 - 30-1.3, 2.0, 2.1, SAEJ2602, ISO17987$0.49
MCP20046 - 271.3, 2.0, 2.1, SAEJ2602$0.64
MCP2004A6 - 271.3, 2.0, 2.1, SAEJ2602$0.60
MCP20215.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$0.91
MCP2021A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20225.5 - 183.3 - 5.0Rev 1.3, 2.0, 2.1, SAE J2602$1.01
MCP2022A6 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20256 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$0.89
MCP20506 - 183.3 - 5.01.3, 2.0, 2.1, SAE J2602$1.05
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP2003-E/P0.4867000.9000008PDIP.300inMatte Tine3
MCP2003A-E/P0.4867000.9000008PDIP.300inMatte Tine3
MCP2003-E/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003T-E/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003T-E/SNVAO0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003AT-E/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003A-E/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003-E/SNVAO0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003A-E/SNVAO0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003AT-E/SNVAO0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003B-E/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003BT-E/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003B-H/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003BT-H/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003B-E/SNVAO0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2003BT-E/SNVAO0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2003B-E/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2003BT-E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2003B-H/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2003BT-H/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2003BT-E/MC0.0170000.1306068DFN2x3x0.9mmMatte Tine3
MCP2003B-H/MC0.0170000.0333338DFN2x3x0.9mmMatte Tine3
MCP2003BT-H/MC0.0170000.1306068DFN2x3x0.9mmMatte Tine3
MCP2003B-E/MC0.0170000.0333338DFN2x3x0.9mmMatte Tine3
MCP2003T-E/MD0.0432000.2121218DFN4x4x0.9mmMatte Tine3
MCP2003-E/MD0.0432000.0769238DFN4x4x0.9mmMatte Tine3
MCP2003AT-E/MD0.0432000.2121218DFN4x4x0.9mmMatte Tine3
MCP2003A-E/MD0.0432000.0769238DFN4x4x0.9mmMatte Tine3
MCP2003/MCP2004/MCP2003A/MCP2004A Data Sheet MCP2004A
AN1009 MCP2021
AN1099 MCP2022
MCP2003 Power-Down and Wake-up Handling MCP2003
Analog Solutions for Automotive Applications Design Guide MCP2022
LIN Serial Analyzer Update v2.03 MCP2022
Analog & Interface Product Selector Guide ENC624J600