MIC2595

The MIC2589 and MIC2595 are single-channel, negative voltage hot swap controllers designed to address the need for safe insertion and removal of circuit boards into "live" system backplanes, while using few external components. The MIC2589/MIC2589R and the MIC2595/MIC2595R are each available in 14-pin SOIC packaging and work in conjunction with an external N-Channel MOSFET for which the gate drive is controlled to provide inrush current limiting and output voltage slew-rate control. Overcurrent fault protection is also provided via a programmable overcurrent threshold and filter. Very fast fault response is provided to ensure that system power supplies maintain regulation even during output short circuits. These controllers offer two responses to a circuit breaker fault condition: the MIC2589 and MIC2595 latch the circuit breaker's output off when the overcurrent threshold interval is exceeded and the overcurrent filter times out while the MIC2589R and MIC2595R automatically attempt to restart at a fixed duty cycle after a current limit fault. A primary Power-Good signal and two secondary (delayed and staggered) Power-Good signals are provided to indicate that the output voltage is within its valid operating range. These signals can be used to perform an all-at-once or a sequenced enabling of one or more DC-DC power modules.

Features
  • Provides safe insertion and removal from live -48V (nominal) backplanes
  • Operates from -19V to -80V
  • Fast responding circuit breaker (<1µs) to short circuit conditions
  • User-programmable overcurrent detector response time
  • Electronic circuit breaker function: Output latch OFF (MIC2589/MIC2595) Output auto-retry (MIC2589R/MIC2595R)
  • Output latch OFF (MIC2589/MIC2595)
  • Output auto-retry (MIC2589R/MIC2595R)
  • Active current regulation to control inrush currents
  • Programmable undervoltage and overvoltage lockouts (MIC2589/MIC2589R)
  • Programmable UVLO hysteresis (MIC2595/MIC2595R)
  • Staggered 'Power-Good' output signals provide load sequencing Active-HIGH (-1) Active-LOW (-2)
  • Active-HIGH (-1)
  • Active-LOW (-2)
Parameter
Parameter Name Value Value
Product type High Voltage (>16V) High Voltage (>16V)
Latch off Yes Yes
# of PWRGD 3 Active High 3 Active High
Θja (C/W) 120 120
Documents
MIC2589/MIC2595-Single-Channel, Negative High-Voltage Hot Swap Power Cont/SeqData Sheets11/05/20154205KB
Micrel AN 108 - Universal Serial Bus Power ManagementAppNote10/02/2015125KB
Micrel AN 21 - Dual Current-Limiting Switch for USB ApplicationsAppNote10/01/201536KB
Similar Devices
ProductPrice5K
MCP18480$4.42
MIC2085
MIC2310
MIC2342
MIC2582$2.34
MIC2583$2.74
MIC2583R$2.74
MIC2584$4.47
MIC2585-2
MIC2587$2.71
MIC2588
MIC2590
MIC2591B
MIC2593
MIC2594
MIC2595
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC2595R-1YM0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MIC2595R-1YM-TR0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MIC2595R-2YM0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MIC2595R-2YM-TR0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MIC2595-2YM-TR0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MIC2595-2YM0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MIC2595-1YM0.1432000.28070214SOIC.150In(3.90mm)Matte Tine3
MIC2595-1YM-TR0.1432000.32500014SOIC.150In(3.90mm)Matte Tine3
MIC2589/MIC2595-Single-Channel, Negative High-Voltage Hot Swap Power Cont/Seq MIC2595
Micrel AN 108 MIC2595
Micrel AN 21 MIC2595