ST54E:SIP (ST21NFCC controller & ST33G1M2 Secure element)

The ST54E is an all-in-one solution including NFC controller and Secure Element with the highest security level (EAL5+ and EMVCo certified hardware).

Connected to a NFC active RF Front-End, the NFC controller offers a complete solution for 13.56 MHz contactless communication.

Fully manufactured in a secure environment, it provides the highest performance levels thanks to its ARM® SC300® core and advanced 90-nm e-Flash technology.

The 64-ball WFBGA (4 x 4 x 0.8 mm) ECOPACK® package provides a reduced footprint and pin-to-pin compatibility with the STMicroelectronics NFC standalone solution. There is no internal direct connection between the two devices inside the package.

A complete range of memory sizes from 128 to more than 600 Kbytes (depending on profile) is available on the Secure Element.

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®packages, depending on their level of environmental compliance. ECOPACK®specifications, grade definitions and product status are available at: www.st.com. ECOPACK®is an ST trademark.

Key Features

  • SIP (system-in-package) with ST21NFCC controller and ST33G1M2 32-bit secure microcontroller for UICC / SE applications
  • NFC controller
    • 36 Kbytes of EEPROM
    • RF digital interface for connection with external RF active Front-End IC.
    • Optimized power consumption modes
    • Battery voltage monitoring
    • Support for up to 3 external Secure Elements
    • Enhanced testability
  • Package
    • WFBGA 64-pin 4x4x0.8, MSL 1, ECOPACK®2
  • RF communications
    • Passive mode – Card Emulation
      • ISO/IEC 14443 Type A & B
      • JIS X 6319 – 4
    • JIS X 6319 – 4
  • Communication interfaces
    • Three SWP interfaces
    • I²C Slave interface up to 1 Mbit/s
    • Dedicated SPI master interface for external RF active Front-End control
  • Secure microcontroller
    • ARM® SecurCore® SC300™ 32-bit RISC core
    • 1280 Kbytes of Flash memory available
    • ISO/IEC 7816-3 interface for T=0 and T=1 protocols (master/slave mode)
    • Single wire protocol (SWP) Interface for communications with NFC router
    • SPI master/slave interface
  • Secure operating system
    • Supports state of the art Secure Element operating systems:
      • JavaCard™ 3.0.1 Classical Edition
      • GlobalPlatform™ 2.2 with Amdts. A and C
      • EMVCo™ certification
    • GlobalPlatform™ 2.2 with Amdts. A and C
    • EMVCo™ certification
  • Electrical characteristics
    • Single power supply pin (VBAT)
    • Battery voltage support from 0 V to 5 V
    • Supports Class B and C operating conditions for UICC
    • Ambient operating temperature -25 to + 85 °C
  • Applications
    • Mobile devices
    • Wearable devices
    • SmartWatch
    • Secure Connected Devices
Product Specifications
DescriptionVersionSize
DB2505: NFC controller and Secure Element system-in-package1.0131 KB
Flyers
DescriptionVersionSize
ST NFC enabled solutions1.02 MB
Secure MCUs for mobile communications and M2M2.3919 KB
Brochures
DescriptionVersionSize
Brochure_Secure MCUs_Secure Soluions_RS6103_BRSMCU0616.pdf1 MB
ST’s solutions for mobile devices2 MB
Product Evaluation Tools
Part NumberManufacturerDescription
SDK-W-ST54Secure Wearable ST54 development kit
Sample & Buy
Part NumberQuantityUnit Price (US$) *PackagePacking TypeECCN (EU)ECCN (US)Country of Origin
ST54E--CDIP 24 .610 S/BTube5A002A1A5A002A1A-
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
ST54ECDIP 24 .610 S/BIndustrialN/A
NFC controller and Secure Element system-in-package ST54E
NFC controller and Secure Element system-in-package ST54E
Secure MCU with 32-bit ARM SC300 CPU, SWP interface, NESCRYPT cryptoprocessor and high-density Flash memory ST33F1M
ST Payment Secure Solution - Java Card™ platform Dual interface with 240 Kbyte of user NVM STPAY-GOLD
NFC controller and Secure Element system-in-package ST54E