TDA75610SLV:Low voltage operation, high efficiency (class SB), intelligent, quad BTL output power amplifier with full I2C diagnostics including tweeter detection and hardware stand-by/mute

The TDA75610SLV is a new quad bridge car radio amplifier, designed in BCD technology, in order to include a wide range of innovative features in a very compact and flexible device.

The TDA75610SLV is equipped with the most complete diagnostics array that communicates the status of each speaker through the I2C bus.

The dissipated output power under average listening condition is significantly reduced when compared to the conventional class AB solutions, thanks to the patented 'class SB' efficiency concept. TDA75610SLV has been designed to be very robust against several kinds of misconnections. It is moreover compliant to the most recent OEM specifications for low voltage operation (so called 'start-stop' battery profile during engine stop), helping car manufacturers to reduce the overall emissions and thus contributing to environment protection. The ST BCD in combination with 'class SB' efficiency and 'intelligent power' has been sold in million of units to most known car manufacturers, the TDA75610SLV is the latest and most compact member of this power amplifiers family.

Key Features

  • Multipower BCD technology
  • MOSFET output power stage
  • DMOS power output
  • High efficiency (class SB)
  • High output power capability 4x25 W/4 Ω @ 14.4 V, 1 kHz, 10% THD, 4 x 45 W max power
  • 2 Ω driving capability (64 W max power)
  • Full I2 C bus driving:
    • Standby
    • Independent front/rear soft play/mute
    • Selectable gain 26 dB /16 dB (for low noise line output function)
    • High efficiency enable/disable
    • I2 C bus digital diagnostics (including DC and AC load detection)
  • Flexible fault detection through integrated diagnostic
  • DC offset detection
  • Four independent short circuit protection
  • Clipping detector pin with selectable threshold (2 %/10 %)
  • Standby/mute pin
  • Linear thermal shutdown with multiple thermal warning
  • ESD protection
  • Very robust against misconnections
  • Improved SVR suppression during battery transients
  • Capable to operate down to 6 V (e.g. “Start-stop”)
Product Specifications
DescriptionVersionSize
DS10056: 4 x 45 W power amplifier with full I2C diagnostics, high efficiency and low voltage operation6.0924 KB
Flyers
DescriptionVersionSize
Intelligent analog power amplifiers837 KB
Selection Guides
DescriptionVersionSize
Power amplifiers and voltage regulators750 KB
Sample & Buy
Part NumberQuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
TDA75610S-48X--FLEXIWATT FM2 27Tube-40105NECEAR99CHINA
TDA75610S-8ZX--OUTLINE FW 27 SMDTube-40105NECEAR99CHINA
TDA75610S-ZST--PowerSO 36Tape And Reel-40105NECEAR99MALAYSIA
TDA75610S-ZSX--PowerSO 36Tube-40105NECEAR99-
TDA75610S-QLX--FLEXIWATT 27 HBTube-40105NECEAR99CHINA
TDA75610S-8ZT--OUTLINE FW 27 SMDTape And Reel-40105NECEAR99CHINA
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
TDA75610S-48XFLEXIWATT FM2 27AutomotiveEcopack2ipc-wspc-1752a_h848-uk99aa6_signed.pdf
TDA75610S-8ZXOUTLINE FW 27 SMDAutomotiveEcopack2
TDA75610S-ZSTPowerSO 36AutomotiveEcopack2ipc-wspc-1752a_h9zs-uk99aa6_signed.pdf
TDA75610S-ZSXPowerSO 36AutomotiveEcopack2ipc-wspc-1752a_a9zs-uk99aa6_signed.pdf
TDA75610S-QLXFLEXIWATT 27 HBAutomotiveEcopack2ipc-wspc-1752a_h8ql-uk99aa6_signed.pdf
TDA75610S-8ZTOUTLINE FW 27 SMDAutomotiveEcopack2
4 x 45 W power amplifier with full I2C diagnostics, high efficiency and low voltage operation TDA75610SLV
4 x 45 W power amplifier with full I2C diagnostics, SSR and low voltage operation TDA75616LV
ST SPI protocol L99PM72PXP
ipc-wspc-1752a_h848-uk99aa6_signed.pdf TDA75610SLV
ipc-wspc-1752a_h9zs-uk99aa6_signed.pdf TDA75610SLV
ipc-wspc-1752a_a9zs-uk99aa6_signed.pdf TDA75610SLV
ipc-wspc-1752a_h8ql-uk99aa6_signed.pdf TDA75610SLV