TPS3809K33-EP

The TPS3809 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems.

During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td(typ) = 200 ms, starts after VDD has risen above the VIT. When the supply voltage drops below the VIT, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense VIT set by an internal voltage divider

TPS3809K33-EP
# of supplies monitored 1    
Iq (Typ) (uA) 9    
Output Driver Type / Reset Output Active-low, Push-pull    
Reset Threshold Accuracy (%) 2    
Time Delay (ms) 200    
VCC (Min) (V) 2    
VCC (Max) (V) 6    
Threshold Voltage 1 (typ) (Typ) (V) 2.93    
Monitored Voltage 1 (typ) (Nom) (V) 3.3    
Pin/Package 3SOT-23    
Rating HiRel Enhanced Product
TPS3809K33-EP 特性
TPS3809K33-EP 芯片订购指南
器件 状态 温度 (oC) 价格(美元) 封装 | 引脚 封装数量 | 封装载体 丝印标记
TPS3809K33MDBVREP ACTIVE -55 to 125 0.80 | 100u SOT-23 (DBV) | 3 3000 | LARGE T&R  
V62/06636-02XE ACTIVE -55 to 125 0.80 | 100u SOT-23 (DBV) | 3 3000 | LARGE T&R  
TPS3809K33-EP 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
TPS3809K33MDBVREP Green (RoHS & no Sb/Br)   CU NIPDAU   Level-1-260C-UNLIM TPS3809K33MDBVREP TPS3809K33MDBVREP
V62/06636-02XE Green (RoHS & no Sb/Br)   CU NIPDAU   Level-1-260C-UNLIM V62/06636-02XE V62/06636-02XE
TPS3809K33-EP 工具与软件
培训内容 型号 软件/工具类型
最常用开关模式电源的功率级设计器 POWERSTAGE-DESIGNER 分析软件
TPS3809K33-EP 应用技术支持与电子电路设计开发资源下载
  1. TPS3809K33-EP数据资料 dataSheet 下载.PDF
  2. TI 德州仪器电源管理选型与价格参考 . xls
  3. (应用手册All Window Watchdog Supervisors
  4. TPS3809K33MDBVREP Reliability Report