TXB0104-Q1 具有自动方向感应和 +/-15kV ESD 保护的 4 位双向电压电平转换器

This 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

The TXB0104 is designed so that the OE input circuit is supplied by VCCA.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down

TXB0104-Q1
Vcc range(V) 1.2 to 5.5  
No. of Bits 4  
Bus Drive(ma) 0.005  
tpd max(ns) 1,5.5,5.8  
Pin/Package 14TSSOP, 14VQFN  
Operating Temperature Range(°C) -40 to 125  
Approx. Price (US$) 0.65 | 1ku  
Rating Automotive
TXB0104-Q1 特性
TXB0104-Q1 芯片订购指南
器件 状态 温度 价格(美元) 封装 | 引脚 封装数量 | 封装载体 丝印标记
TXB0104QPWRQ1 ACTIVE -40 to 125 0.65 | 1ku TSSOP (PW) | 14 2000 | LARGE T&R  
TXB0104QRGYRQ1 ACTIVE -40 to 125 0.65 | 1ku VQFN (RGY) | 14 3000 | LARGE T&R  
TXB0104-Q1 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
TXB0104QPWRQ1 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM TXB0104QPWRQ1 TXB0104QPWRQ1
TXB0104QRGYRQ1 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-2-260C-1 YEAR TXB0104QRGYRQ1 TXB0104QRGYRQ1
TXB0104-Q1 应用技术支持与电子电路设计开发资源下载
  1. TXB0104-Q1 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器电压电平转换产品选型与价格 . xls
  3. Shelf-Life Evaluation of Lead-Free Component Finishes (PDF 1305 KB)
  4. Understanding and Interpreting Standard-Logic Data Sheets (PDF 857 KB)
  5. TI IBIS File Creation, Validation, and Distribution Processes (PDF 380 KB)
  6. Implications of Slow or Floating CMOS Inputs (PDF 101 KB)
  7. CMOS Power Consumption and CPD Calculation (PDF 89 KB)
  8. Designing With Logic (PDF 186 KB)
  9. Live Insertion (PDF 150 KB)
  10. Input and Output Characteristics of Digital Integrated Circuits (PDF 1708 KB)
  11. Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc (PDF 43 KB)
  12. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  13. LOGIC Pocket Data Book (PDF 6001 KB)
  14. HiRel Unitrode Power Management Brochure (PDF 206 KB)
  15. Logic Cross-Reference (PDF 2938 KB)