L6474:Stepper motor driver with up to 16 microsteps with SPI and advanced current control

The L6474 device, realized in analog mixed signal technology, integrates a dual low RDS(on)DMOS full bridge with all power switches equipped with an accurate on-chip current sensing circuitry suitable for non-dissipative current control and overcurrent protections. Thanks to a new current control, a 1/16 microstepping is achieved through an adaptive decay mode which outperforms traditional implementations.

All data registers, including those used to set analogue values (i.e.: current control value, current protection trip point, deadtime, etc.) are sent through a standard 5 Mbit/s SPI.

A very rich set of protections (thermal, low bus voltage, overcurrent) makes the L6474 device “bullet proof” as required by the most demanding motor control applications.

Key Features

  • Operating voltage: 8 - 45 V
  • 7.0 A output peak current (3.0 Ar.m.s. )
  • Low RDS(on) power MOSFETs
  • Programmable power MOS slew rate
  • Up to 1/16 microstepping
  • Current control with adaptive decay
  • Non-dissipative current sensing
  • SPI interface
  • Low quiescent and standby currents
  • Programmable non-dissipative overcurrent protection on all power MOS
  • Two-level overtemperature protection
产品规格
DescriptionVersionSize
DS8773: Fully integrated microstepping motor driver4.0950 KB
应用手册
DescriptionVersionSize
AN4290: L647x, L648x and powerSTEP01 family communication protocol2.1486 KB
AN4158: Peak current control with automatic decay adjustment and predictive current control: basics and setup2.1983 KB
用户手册
DescriptionVersionSize
UM1771: EVAL6474H-DISC: fully integrated microstepping motor driver based on the L6474 and STM32™2.01 MB
UM2022: SPINFamily evaluation tool1.21 MB
Design Notes & Tips
DescriptionVersionSize
DT0055: Maintaining message synchronization with L647x, L648x, and PowerStep01 devices1.1163 KB
DT0056: Planning for easy troubleshooting with your L647x, L648x, or PowerStep01 design2.0172 KB
简报
DescriptionVersionSize
An introduction to electric motors1.02 MB
STEVAL-3DP001V1 - Reference design for FDM 3D printing1.01 MB
STM32 F1 firmware library for easySPIN (L6474) motor driver - quick guide1.0382 KB
STSPIN L6474 product presentation1.0538 KB
宣传册
DescriptionVersionSize
STEVAL-3DP001V1 - Plug-n-play solution for 3D printers10.2016964 KB
选型指南
DescriptionVersionSize
STSPIN motor drivers09.20162 MB
手册
DescriptionVersionSize
Motor Control Reference Guide15.102 MB
Products and Solutions for Factory Automation and Control1.03 MB
Software Development Tools
型号制造商Description
STSW-SPIN002STEvaluation software with graphical user interface for STSPIN motor driver ICs
STM32 Open Development Environment
型号制造商Description
X-NUCLEO-IHM01A1STStepper motor driver expansion board based on L6474 for STM32 Nucleo
MCUs Embedded Software
型号制造商Description
X-CUBE-SPN1STStepper motor driver software expansion for STM32Cube
解决方案评估工具
型号制造商Description
EVAL6474HStepper motor driver mounting the L6474
STEVAL-3DP001V1STEvaluation board for 3D printer
样片和购买
型号QuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
L6474H10002.5HTSSOP28Tube-40150NECEAR99MALAYSIA
L6474PDTR10002.851PowerSO 36Tape And Reel-40150NECEAR99ITALY
L6474HTR10002.5HTSSOP28Tape And Reel-40150NECEAR99MALAYSIA
L6474PD10002.851PowerSO 36Tube-40150NECEAR99ITALY
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
L6474HHTSSOP28IndustrialEcopack2md_y9-wspc-htssop28-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_a5y9-wspc-ui49aav-wspc-lock.pdf
md_y9-wspc-htssop28-wspc-body-wspc-4.xml
L6474PDTRPowerSO 36IndustrialEcopack1md_8c-wspc-powerso-wspc-36-wspc-.430-wspc-body-wspc-width_a68c-wspc-ui49aav.pdf
md_8c-wspc-powerso-wspc-36-wspc-.xml
L6474HTRHTSSOP28IndustrialEcopack2md_y9-wspc-htssop28-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_a5y9-wspc-ui49aav-wspc-lock.pdf
md_y9-wspc-htssop28-wspc-body-wspc-4.xml
L6474PDPowerSO 36IndustrialEcopack1md_8c-wspc-powerso-wspc-36-wspc-.430-wspc-body-wspc-width_a68c-wspc-ui49aav.pdf
md_8c-wspc-powerso-wspc-36-wspc-.xml
Fully integrated microstepping motor driver L6474
L647x, L648x and powerSTEP01 family communication protocol EVAL6482H
Peak current control with automatic decay adjustment and predictive current control: basics and setup EVAL6482H
EVAL6474H-DISC: fully integrated microstepping motor driver based on the L6474 and STM32™ L6474
SPINFamily evaluation tool STSW-SPIN002
Maintaining message synchronization with L647x, L648x, and PowerStep01 devices L6482
Planning for easy troubleshooting with your L647x, L648x, or PowerStep01 design L6258EA
Planning for easy troubleshooting with your L647x, L648x, or PowerStep01 design L6258EA
Getting started with the STEVAL-3DP001V1 3D printer board STEVAL-3DP001V1
STSW-STM32056
Planning for easy troubleshooting with your L647x, L648x, or PowerStep01 design L6474
Getting started with the STEVAL-3DP001V1 3D printer board STEVAL-3DP001V1
Planning for easy troubleshooting with your L647x, L648x, or PowerStep01 design L6258EA
STEVAL-IPM07F motor control power board based on the SLLIMM™ 2nd series of IGBT IPMs STEVAL-IPM07F
STEVAL-SPIMD20V1 demonstration kit based on the SPIMD20 integrated motor drive STEVAL-SPIMD20V1
md_y9-wspc-htssop28-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65-wspc-expad_a5y9-wspc-ui49aav-wspc-lock.pdf L6474
md_y9-wspc-htssop28-wspc-body-wspc-4.xml L6474
md_8c-wspc-powerso-wspc-36-wspc-.430-wspc-body-wspc-width_a68c-wspc-ui49aav.pdf L6474
md_8c-wspc-powerso-wspc-36-wspc-.xml L6470