ADL5511 DC to 6 GHz ENVELOPE AND TruPwr™ RMS Detector

The rms output is a linear-in-V/V voltage with a conversion gain of 1.9 V/V rms at 900 MHz. The envelope output has a conversion gain of 1.46 V/V at 900 MHz and is referenced to an internal 1.1 V reference voltage, which is available on the EREF pin. The ADL5511 can operate from dc to 6 GHz on signals with envelope bandwidths up to 130 MHz. The extracted envelope can be used for RF power amplifier (PA) linearization and efficiency enhancements and the rms output can be used for rms power measurement. The high rms accuracy and fast envelope response are particularly useful for envelope detection and power measurement of broadband, high peak-to-average signals that are used in CDMA2000, W-CDMA, and LTE systems. The ADL5511 operates from −40°C to +85°C and is available in a 16-lead, 3 mm × 3 mm LFCSP package. Applications RMS power and envelope detection of W-CDMA, CDMA2000, LTE, and other complex waveforms Drain modulation based power amplifier linearization Power amplifier linearization employing envelope-tracking methods

The ADL5511 is an RF envelope and TruPwr™ rms detector. The envelope output voltage is presented as a voltage that is proportional to the envelope of the input signal. The rms output voltage is independent of the peak-to-average ratio of the input signal.

The rms output is a linear-in-V/V voltage with a conversion gain of 1.9 V/V rms at 900 MHz. The envelope output has a conversion gain of 1.46 V/V at 900 MHz and is referenced to an internal 1.1 V reference voltage, which is available on the EREF pin.

The ADL5511 can operate from dc to 6 GHz on signals with envelope bandwidths up to 130 MHz.

The extracted envelope can be used for RF power amplifier (PA) linearization and efficiency enhancements and the rms output can be used for rms power measurement. The high rms accuracy and fast envelope response are particularly useful for envelope detection and power measurement of broadband, high peak-to-average signals that are used in CDMA2000, W-CDMA, and LTE systems.

The ADL5511 operates from −40°C to +85°C and is available in a 16-lead, 3 mm × 3 mm LFCSP package.

Applications
  • RMS power and envelope detection of W-CDMA, CDMA2000, LTE, and other complex waveforms
  • Drain modulation based power amplifier linearization
  • Power amplifier linearization employing envelope-tracking methods
Features and Benefits
  • Envelope tracking RF detector with output proportional to input voltage
  • Separate TruPwr rms output
  • No balun or external tuning required
  • Excellent temperature stability
  • Input power dynamic range of 47 dB
  • Input frequency range from dc to 6 GHz
  • 130 MHz envelope bandwidth
  • Envelope delay: 2 ns
  • Single-supply operation: 4.75 V to 5.25 V
  • Supply current: 21.5 mA
  • Power-down mode: 130 μW
  • RF & Microwave
    Data Sheets
    Documentnote
    ADL5511: DC to 6 GHz Envelope and TruPwr RMS Detector Data Sheet (Rev. B)PDF 435 kB
    User Guides
    Documentnote
    UG-312: ADL5511-EVALZ: Evaluation BoardPDF 140 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADL5511ACPZ-R7 Production16 ld LFCSP (3x3mm, 1.6mm exposed pad) REEL 1500-40 to 85C07.33Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    ADL5511-EVALZEvaluation Board100.19Y
    Reference Materials
    ADL5511: DC to 6 GHz Envelope and TruPwr RMS Detector Data Sheet (Rev B, 05/2014) ADL5511
    ADL5511:直流至6 GHz包络和TruPwr RMS检波器 (Rev A, 02/2012) ADL5511
    ADL5511: DC to 6 GHz Envelope and TruPwr RMS Detector Data Sheet (Rev. B) adl5511
    ADL5511:直流至6 GHz包络和TruPwr RMS检波器 (Rev. A) adl5511
    UG-312: ADL5511-EVALZ: Evaluation Board adl5511
    RF Source Booklet adf9010