• 简体中文
• English

MAX3110E：SPI/MICROWIRE-Compatible UART and ±15kV ESD-Protected RS-232 Transceivers with Internal Capacitors

Industry's-First Integrated Serial UART and Dual RS-232 IC

The MAX3110E/MAX3111E combine a full-featured universal asynchronous receiver/transmitter (UART) with ±15kV ESD-protected RS-232 transceivers and integrated charge-pump capacitors into a single 28-pin package for use in space-, cost-, and power-constrained applications. The MAX3110E/MAX3111E also feature an SPI™/QSPI™/MICROWIRE™-compatible serial interface to save additional board space and microcontroller (µC) I/O pins. A proprietary low-dropout output stage enables the 2-driver/2-receiver interface to deliver true RS-232 performance down to VCC = +3V (+4.5V for MAX3110E) while consuming only 600µA. The receivers remain active in a hardware/software-invoked shutdown, allowing external devices to be monitored while consuming only 10µA. Each device is guaranteed to operate at up to 230kbps while maintaining true EIA/TIA-232 output voltage levels. The MAX3110E/MAX3111E's UART includes a crystal oscillator and baud-rate generator with software-programmable divider ratios for all common baud rates from 300baud to 230kbaud. The UART features an 8-word-deep receive FIFO that minimizes processor overhead and provides a flexible interrupt with four maskable sources. Two control lines (one input and one output) are included for hardware handshaking. The UART and RS-232 functions can be used together or independently since the two functions share only supply and ground connections (the MAX3110E/MAX3111E are hardware- and software-compatible with the MAX3100 and MAX3222E).

Key Features Integration Reduces Cost and Board Space Integrated RS-232 Transceiver and UART in a Single 28–Pin Package Guaranteed 230kbps Data Rate SPI/QSPI/MICROWIRE-Compatible µC Interface Internal Charge-Pump Capacitors—No External Components Required Low-Power Operation Reduces Thermal Dissipation True RS-232 Operation Down to VCC = +3V (MAX3111E) Single-Supply Operation +5V (MAX3110E) +3.3V (MAX3111E) 600µA Supply Current 10µA Shutdown Supply Current with Receiver Interrupt Active Hardware/Software-Compatible with MAX3100 and MAX3222E

MAX3110E, MAX3111E: Typical Application Circuit Applications/Uses Handheld/Battery-Powered Equipment Handy Terminals Industrial Front-Panel Interfaces Point-of-Sale (POS) Devices Telecom/Networking Diagnostic Ports

DataSheet

Parametrics

Design kits & evaluation modules

• MAX3111EEVKIT

Quality and Environmental Data

• MAX3110E.pdf

Related Products

• MAX3140：SPI/MICROWIRE-Compatible UART with Integrated True Fail Safe RS-485/RS-422 Transceivers
• MAX3100：SPI/MICROWIRE-Compatible UART

Ordering Information