MAX5823:Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface

Feature-Rich, 8-Channel DAC Family Offered in a 5.75mm2 WLP Footprint

The MAX5823/MAX5824/MAX5825 8-channel, low-power, 8-/10-/12-bit, voltage-output digital-to-analog converters (DACs) include output buffers and an internal 3ppm/°C reference that is selectable to be 2.048V, 2.500V, or 4.096V. The MAX5823/MAX5824/MAX5825 accept a wide supply voltage range of 2.7V to 5.5V with extremely low power (6mW) consumption to accommodate most low-voltage applications. A precision external reference input allows rail-to-rail operation and presents a 100kΩ (typ) load to an external reference. The MAX5823/MAX5824/MAX5825 have an I2C-compatible, 2-wire interface that operates at clock rates up to 400kHz. The DAC output is buffered and has a low supply current of less than 250µA per channel and a low offset error of ±0.5mV (typ). On power-up, the MAX5823/ MAX5824/MAX5825 reset the DAC outputs to zero or midscale based on the status of M/active-low Z logic input, providing flexibility for a variety of control applications. The internal reference is initially powered down to allow use of an external reference. The MAX5823/MAX5824/MAX5825 allow simultaneous output updates using software LOAD commands or the hardware load DAC logic input (active-low LDAC). The MAX5823/MAX5824/MAX5825 feature a watchdog function which can be enabled to monitor the I/O interface for activity and integrity. A clear logic input (active-low CLR) allows the contents of the CODE and the DAC registers to be cleared asynchronously and simultaneously sets the DAC outputs to the programmable default value. The MAX5823/MAX5824/MAX5825 are available in a 20-pin TSSOP and an ultra-small, 20-bump WLP package and are specified over the -40°C to +125°C temperature range.

Key Features
  • Eight High-Accuracy DAC Channels
    • 12-Bit Accuracy Without Adjustment
    • ±1 LSB INL Buffered Voltage Output
    • Guaranteed Monotonic Over All Operating Conditions
    • Independent Mode Settings for Each DAC
  • Three Precision Selectable Internal References
    • 2.048V, 2.500V, or 4.096V
  • Internal Output Buffer
    • Rail-to-Rail Operation with External Reference
    • 4.5µs Settling Time
    • Outputs Directly Drive 2kΩ Loads
  • Small 6.5mm × 4.4mm 20-Pin TSSOP or Ultra-Small 2.5mm × 2.3mm 20-Bump WLP Package
  • Wide 2.7V to 5.5V Supply Range
  • Separate 1.8V to 5.5V VDDIO Power-Supply Input
  • Fast 400kHz I2C-Compatible, 2-Wire Serial Interface
  • Pin-Selectable Power-On-Reset to Zero-Scale or Midscale DAC Output
  • Active-Low LDAC and Active-Low CLR For Asynchronous DAC Control
  • Three Software-Selectable Power-Down Output Impedances
    • 1kΩ, 100kΩ, or High Impedance
MAX5823, MAX5824, MAX5825: Functional Diagram
MAX5823, MAX5824, MAX5825: Functional Diagram
Applications/Uses
  • Automatic Tuning and Optical Control
  • Gain and Offset Adjustment
  • Portable Instrumentation
  • Power Amplifier Control and Biasing
  • Process Control and Servo Loops
  • Programmable Voltage and Current Sources
DataSheet
titleDownload file
MAX5823-MAX5825 Data SheetMAX5823-MAX5825.pdf
Parametrics
Part NumberResolution
(bits)
ChannelsOutput TypeReferenceINL
(±LSB)
InterfaceSupply Range
(V)
Supply Range
(V)
ICC
(mA)
Settling Time
(µs)
Package/PinsOper. Temp.
(°C)
Budgetary
Price
maxminmaxmaxtypSee Notes
MAX582388Voltage- BufferedInt./Ext.0.25Serial - I2C2.75.522.2TSSOP/20-40 to +125$2.82 @1k
MAX5824100.52.6TSSOP/20
WLP/20
$4.02 @1k
MAX58251214.5TSSOP/20
WLP/20
$6.47 @1k
Design kits & evaluation modules
Quality and Environmental Data
Related Products
  • MAX5715:Ultra-Small, Quad-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and SPI Interface
  • MAX5723:Ultra-Small, Octal-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and SPI Interface
  • MAX5724:Ultra-Small, Octal-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and SPI Interface
  • MAX5725:Ultra-Small, Octal-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and SPI Interface
  • MAX5815:Ultra-Small, Quad-Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I²C Interface
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5823AUP+ActiveTSSOP,;20 pin;45.2 mm²-40°C to +125°CLead Free
MAX5823AUP+TActiveTSSOP,;20 pin;45.2 mm²-40°C to +125°CLead Free
MAX5823-MAX5825.pdf MAX5825
MAX5823-MAX5825_cn.pdf MAX5825
MAX5823.pdf MAX5823
MAX5823-MAX5825_cn.pdf MAX5825