SN75176B 差动总线收发器

The SN65176B and SN75176B differential bus transceivers are integrated circuits designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.

The SN65176B and SN75176B combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0

SN75176B
Drivers Per Package 1  
Receivers Per Package 1  
Supply Voltage(s)(V) 5  
ESD(kV) 2  
Temp Range(C) 0 to 70  
Signaling Rate(Mbps) 10  
ICC(Max)(mA) 70  
Fail Safe None  
Isolated No  
# of TX/RX 1 TX / 1 RX  
Common Mode Range -7 to 12  
Number of Nodes 32  
Duplex Half  
Footprint SN75176  
Comments Industry Standard - Half-Duplex Transceiver  
Pin/Package 8PDIP, 8SOIC  
Rating Catalog  
Fault Protection(V) -10 to 15
SN75176B 特性
SN75176B 芯片订购指南
器件 状态 温度 价格 封装 | 引脚 封装数量 | 封装载体 丝印标记
SN75176BD ACTIVE 0 to 70 1.35 | 1ku SOIC (D) | 8 75 | TUBE  
SN75176BDE4 ACTIVE 0 to 70 1.35 | 1ku SOIC (D) | 8 75 | TUBE  
SN75176BDG4 ACTIVE 0 to 70 1.35 | 1ku SOIC (D) | 8 75 | TUBE  
SN75176BDR ACTIVE 0 to 70 1.15 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
SN75176BDRE4 ACTIVE 0 to 70 1.15 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
SN75176BDRG4 ACTIVE 0 to 70 1.15 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
SN75176BP ACTIVE 0 to 70 1.25 | 1ku PDIP (P) | 8 50 | TUBE  
SN75176BPE4 ACTIVE 0 to 70 1.25 | 1ku PDIP (P) | 8 50 | TUBE  
SN75176B 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
SN75176BD Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75176BD SN75176BD
SN75176BDE4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75176BDE4 SN75176BDE4
SN75176BDG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75176BDG4 SN75176BDG4
SN75176BDR Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75176BDR SN75176BDR
SN75176BDRE4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75176BDRE4 SN75176BDRE4
SN75176BDRG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75176BDRG4 SN75176BDRG4
SN75176BP Pb-Free (RoHS)  CU NIPD  N/A for Pkg Type SN75176BP SN75176BP
SN75176BPE4 Pb-Free (RoHS)  CU NIPD  N/A for Pkg Type SN75176BPE4 SN75176BPE4
SN75176B 应用技术支持与电子电路设计开发资源下载
  1. SN75176B 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器RS-422选型与价格 . xls
  3. 所选封装材料的热学和电学性质 (PDF 645 KB)
  4. 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
  5. 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
  6. 接口选择指南 (Rev. D) (PDF 2994 KB)
  7. Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
  8. Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
  9. Isolated RS-485 Reference Design (PDF 80 KB)
  10. 无铅组件涂层的保存期评估 (PDF 1305 KB)
  11. Analog Signal Chain Guide (8.62 MB)
  12. Industrial Interface IC Solutions (101 KB)
SN75176B 工具和软件
培训内容 型号 软件/工具类型
SN75176B 评估模块 SN75176BEVM 开发电路板/EVM